Founded in 1930, Clayton Industries pioneered the development of controlled circulation Steam Generators, a type of Water Tube Boiler, starting with very small capacity units (8 BHP). Today, Clayton builds Generators and Fluid Heaters that range in size from 20 to 700 BHP. These compact, fuel-efficient, units offer many advantages and are installed individually or in multiples in some of the large plants in the world today.
Boiler Burner Technology
- Steam Generators
Steam Generators
- NOx down to 30 ppm with FGR; down to 12 ppm with Bulff Body; down to 9 ppm with Fibre Metal Burner.
- Capacity 20 - 700 HP; about 600,000 to 23,450,000 BTUs/hour
- Multi-fuel capable
Clayton currently offers Steam Generators and Fluid Heaters in 15 sizes ranging from 20 to 700 Boiler Horsepower (BHP) – 690 to 24,150 pounds of steam per hour. These units are controlled flow, water tube boilers, built to the appropriate national and local standards, using high quality materials and workmanship. Units are designed to burn natural gas, propane, light oil and heavy oil, as well as a combination of these fuels and are available with steam design pressures up to 3000 psig. Superheat Units, which provide superheated steam, are also available in a variety of sizes and for a range of steam pressures and temperatures.
Industry today is faced with tighter regulations with regards to emissions. The requirement to clean-up the environment has placed an ever increasing burden on all of us to look for better and cleaner ways to utilize our natural resources. In keeping with a long-standing tradition of innovations and quality, Clayton Industries is pleased to provide low emissions combustion systems to meet your specific air permitting requirements.
Our Ultra Low NOx-Low CO burner was developed by Clayton and the American Gas Association Research Laboratories, with support from the Southern California Gas Company, the California South Coast Air Quality Management District and the Gas Research Institute. This advanced burner technology provides ultra-low emissions, combined with the highest thermal efficiencies typically found in Clayton Steam Generators and Fluid Heaters.
PDF Literature
Clayton Brochure
Case Study using a Clayton Steam Generator at Seabrook, a food processing plant
Top 10 Reasons to buy Clayton
For More Information
Clayton Industries
4213 N. Temple City Blvd.
P.O. Box 5530
El Monte, CA 91734-1530
Phone : 1-626-443-9381
Fax : 1-626-442-1701Go to the Clayton Industries web site at www.claytonindustries.com
Source: Clayton web site 4/2003; Eric Kessler - Clayton 6/2003; Rev 8/2005;